The following assembly instructions are for our small and medium log store
The most important thing when assembling the log store is that the ground on which the unit is to stand must be level
- Place floor on level surface and then place one side and the back together
- While holding the back and side together insert one screw provided into the top hole from the inside in the corner where the back and side meet
- Insert the other three screws in same manner as the top screw
- Repeat this procedure with with the other side
- The sides and back now need to be screwed to the floor through the pre drilled holes in each of the bottom frames
- Place the roof over the unit making sure sits flat on top of the log store
- Screw through the roof frame into the sides and repeat on the opposite side